# Enable DHCP globally. Configure GE 0/0/2 and GE 0/0/4 on the S5328C-EI-24S  as a hybrid

 

interface, and configure frames from VLAN 100 to pass through GE 0/0/2 in untagged

 

mode.

 

<Quidway> system-view

 

[Quidway] dhcp enable

 

[Quidway] interface gigabitethernet 0/0/2

 

[Quidway-GigabitEthernet0/0/2] port hybrid pvid vlan 2

 

[Quidway-GigabitEthernet0/0/2] port hybrid untagged vlan 2 to 100

 

[Quidway-GigabitEthernet0/0/2] quit

 

[Quidway] interface gigabitethernet 0/0/4

 

[Quidway-GigabitEthernet0/0/4] port hybrid pvid vlan 100

 

[Quidway-GigabitEthernet0/0/4] port hybrid untagged vlan 100

 

[Quidway-GigabitEthernet0/0/4] quit

 

# Configure DHCP policy VLAN based on MAC addresses.

 

<Quidway> system-view

 

[Quidway] vlan 100

 

[Quidway-vlan100] dhcp policy-vlan mac-address 001E-9089-C65A priority 5

 

[Quidway-vlan100] dhcp policy-vlan mac-address 00E0-4C84-0B44 priority 5

 

[Quidway-vlan100] quit

 

2. Verify the configuration.

 

# After PC1 and PC2 go online and obtain IP addresses, ping the DHCP server from PC1

 

and PC2. The ping operations are successful.

 

C:\>ping 192.168.31.251

 

Pinging 192.168.31.251 with 32 bytes of data:

 

Reply from 192.168.31.251: bytes=32 time=126ms TTL=255

 

Reply from 192.168.31.251: bytes=32 time=2ms TTL=255

 

Reply from 192.168.31.251: bytes=32 time=2ms TTL=255

 

Reply from 192.168.31.251: bytes=32 time=2ms TTL=255

 

Ping statistics for 192.168.31.251:

 

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

 

Approximate round trip times in milli-seconds:

 

Minimum LS-S5352C-EI  = 2ms, Maximum = 126ms, Average = 33ms