NE40E-X8 93129312 is connected below the PBX, part of switch network address line, can see in the offline recording in me60; but the little switch the following users are normal, no single repair, there is no master pointing! Network address configuration is not certified, not charging
1) address pool configuration
IP pool switchpool-1 bas local
Gateway 192.168.2.1 255.255.255.0
Section 0 192.168.2.2 192.168.2.254
Excluded-ip-address 192.168.2.2 192.168.2.254
2) domain configuration
Domain VLAN
Authentication-scheme no
Accounting-scheme no
Ip-pool switchpool-1
3) the sub interface configuration
Interface GigabitEthernet1/1/0.2
User-vlan 3031
Bas
#
Access-type layer2-subscriber default-domain authentication VLAN
Authentication-method bind
4) static user configuration
Static-user 192.168.2.2 192.168.2.254 gateway 192.168.2.1 interface GigabitEthernet1/1/0.2 VLAN 30 domain-name VLAN detect
I don't think configuration problem, because most of the network ME60-X3 switch no problem, only 20 switches have such problems.