Configuring LS-S2318TP-EI-AC VLL QoS can solve QoS issues such as bandwidth allocation and resource usage on a Layer 2 VPN.
Run:
system-view
The system view is displayed.
Run:
interface interface-type interface-number[.subinterface-number ]
The interface view is displayed.
Run:
mpls l2vpn qos cir cir [ pir pir ] [ qos-profile qos-profile-name ] [ secondary ]
Bandwidth resources are configured for the VLL.
NOTE:
CCC VLL does not support VLL QoS.
Only the NE80E/40E support the configuring of the QoS-Profile.
A QoS-Profile that is in use cannot be deleted.
Run:
system-view
The system view is displayed.
Run:
pw-template template-name
A PW template is created, and the PW template view is displayed.
Run:
qos cir cir [ pir pir ] [ qos-profile qos-profile-name ]
Bandwidth resources are configured for the VLL.
Run:
quit
The system view is displayed.
Run:
interface interface-type interface-number[.subinterface-number ]
The interface view is displayed.
Run:
mpls static-l2vc { { destination ip-address | pw-template pw-template-name vc-id } * | destination ip-address [ vc-id ] } transmit-vpn-label transmit-label-value receive-vpn-label receive-label-value [ tunnel-policy tnl-policy-name | [ control-word | no-control-word ] | [ raw | tagged | ip-interworking ] ] *
An SVC VLL connection LS-S2326TP-EI-AC is established.